The Series 11000 is designed for applications where the mechanism must have optimum protection from the operational environment. The Hard-Top design ensures protection without the use of bellows. A protective tape, under tension, rolls around an internal capstan within the table top and seals the normal gap between upper and lower sections. The rail bearing system has 4 preloaded journals for high load capacity. A 5mm pitch G0 ballscrew is used as standard. Adjustable Limit and Datum switches are available within the stage. Stepping or servo motors with rear encoders are fitted as required. High accuracy linear scale encoders may be fitted within the Series 11000 assembly. All switch, motor and encoder connections are made through QM connectors.
Optional Features
- Linear encoder
- Air pressure fitting
- Brake
- Side mounted motor
| Specification | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Travel (mm) | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 |
| Stage Load capacity (kg) | |||||||||
| Horizontal | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
| Vertical | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 |
| Stage Weight (kg) | 16.5 | 17 | 17.5 | 18 | 18.5 | 19 | 19.5 | 20 | 20.5 |
| Ballscrew Drive | G0, Precision ground, 5mm Pitch (2,4 or 10mm optional) |
| Accuracy | 2 microns per 25mm of travel |
| Resolution | 1 micron standard (other resolutions available) |
| Flatness and straightness of travel | ±2 microns per 25mm of travel |
| Bi-directional repeatability | ±1 micron (closed loop servo, motor-mounted encoder) |
| Materials | Aluminium alloy and stainless steel |
| Finish | Anodised and dyed black |
Please see CAD drawing on the PDF linked below for full dimensions
You can open or download this page as a PDF file.
MotionLink Ltd, Main Street, Chaddleworth, Berkshire RG20 7EH United Kingdom.
Tel: +44 (0)1488 638488 Fax: +44 (0)1488 638802